Cursor Konstruktorer

Källa:

Cursor.cs

Källa:

Cursor.cs

Källa:

Cursor.cs

Källa:

Cursor.cs

Källa:

Cursor.cs

public:
 Cursor(IntPtr handle);

public Cursor(IntPtr handle);

new System.Windows.Forms.Cursor : nativeint -> System.Windows.Forms.Cursor

Public Sub New (handle As IntPtr)

Parametrar

Undantag

Exempel

I följande kodexempel skapas en markör från Current markörens Handle, ändrar dess position och urklippsrektangeln. Resultatet är att markören flyttas upp och till vänster 50 bildpunkter från där den körs. Dessutom ändras markörens urklippsrektangeln till formulärets gränser (som standard är det användarens hela skärm). Det här exemplet kräver att du har en Form och en Button för att anropa den här koden när den klickas.

void MoveCursor()
{
   // Set the Current cursor, move the cursor's Position,
   // and set its clipping rectangle to the form.

   this->Cursor = gcnew System::Windows::Forms::Cursor( ::Cursor::Current->Handle );
   ::Cursor::Position = Point(::Cursor::Position.X - 50,::Cursor::Position.Y - 50);
   ::Cursor::Clip = Rectangle(this->Location,this->Size);

}

private void MoveCursor()
{
   // Set the Current cursor, move the cursor's Position,
   // and set its clipping rectangle to the form. 

   this.Cursor = new Cursor(Cursor.Current.Handle);
   Cursor.Position = new Point(Cursor.Position.X - 50, Cursor.Position.Y - 50);
   Cursor.Clip = new Rectangle(this.Location, this.Size);
}

Private Sub MoveCursor()
   ' Set the Current cursor, move the cursor's Position,
   ' and set its clipping rectangle to the form. 

   Me.Cursor = New Cursor(Cursor.Current.Handle)
   Cursor.Position = New Point(Cursor.Position.X - 50, Cursor.Position.Y - 50)
   Cursor.Clip = New Rectangle(Me.Location, Me.Size)
End Sub

Kommentarer

Du måste frigöra markörhandtaget när du är klar med det. Mer information om hur du bortskaffar resurser finns i Rensa ohanterade resurser.

Källa:

Cursor.cs

Källa:

Cursor.cs

Källa:

Cursor.cs

Källa:

Cursor.cs

Källa:

Cursor.cs

public:
 Cursor(System::IO::Stream ^ stream);

public Cursor(System.IO.Stream stream);

new System.Windows.Forms.Cursor : System.IO.Stream -> System.Windows.Forms.Cursor

Public Sub New (stream As Stream)

Parametrar

Exempel

I följande kodexempel läses en markör in från en Stream som skapats med OpenFile metoden för en OpenFileDialog. När metoden anropas visas en OpenFileDialog för användaren och när en. CUR-filen är markerad och dialogrutan stängd, filen öppnas och den Stream returnerade används för att skapa en Cursor.

private:
   void SetCursor()
   {
      // Display an OpenFileDialog so the user can select a cursor.
      OpenFileDialog^ openFileDialog1 = gcnew OpenFileDialog;
      openFileDialog1->Filter = "Cursor Files|*.cur";
      openFileDialog1->Title = "Select a Cursor File";
      openFileDialog1->ShowDialog();

      // If a .cur file was selected, open it.
      if (  !openFileDialog1->FileName->Equals( "" ) )
      {
         // Assign the cursor in the stream to the form's Cursor property.
         this->Cursor = gcnew System::Windows::Forms::Cursor( openFileDialog1->OpenFile() );
      }
   }

private void SetCursor()
{
   // Display an OpenFileDialog so the user can select a cursor.
   OpenFileDialog openFileDialog1 = new OpenFileDialog();
   openFileDialog1.Filter = "Cursor Files|*.cur";
   openFileDialog1.Title = "Select a Cursor File";
   openFileDialog1.ShowDialog();

   // If a .cur file was selected, open it.
   if(openFileDialog1.FileName != "")
   {
      // Assign the cursor in the stream to the form's Cursor property.
      this.Cursor = new Cursor(openFileDialog1.OpenFile());
   }
}

Private Sub SetCursor()
   ' Display an OpenFileDialog so the user can select a Cursor.
   Dim openFileDialog1 As New OpenFileDialog()
   openFileDialog1.Filter = "Cursor Files|*.cur"
   openFileDialog1.Title = "Select a Cursor File"
   openFileDialog1.ShowDialog()
         
   ' If a .cur file was selected, open it.
   If openFileDialog1.FileName <> "" Then
      ' Assign the cursor in the stream to the form's Cursor property.
      Me.Cursor = New Cursor(openFileDialog1.OpenFile())
   End If
End Sub

Kommentarer

Dataströmmen som anges av stream måste innehålla en markörfil (.cur).

Se även

• Stream

Källa:

Cursor.cs

Källa:

Cursor.cs

Källa:

Cursor.cs

Källa:

Cursor.cs

Källa:

Cursor.cs

public:
 Cursor(System::String ^ fileName);

public Cursor(string fileName);

new System.Windows.Forms.Cursor : string -> System.Windows.Forms.Cursor

Public Sub New (fileName As String)

Parametrar

Exempel

I följande kodexempel visas kundinformation i en TreeView kontroll. Rotträdsnoderna visar kundnamn och de underordnade trädnoderna visar de ordernummer som tilldelats varje kund. I det här exemplet visas 1 000 kunder med 15 beställningar vardera. Ommålningen TreeView av undertrycks med hjälp BeginUpdate av metoderna och EndUpdate och en väntan Cursor visas medan objekten TreeView skapas och målas TreeNode . Det här exemplet kräver att du har ett Customer objekt som kan innehålla en samling Order objekt. Det kräver också att du har skapat en instans av en TreeView kontroll på en Form.

// The basic Customer class.
ref class Customer: public System::Object
{
private:
   String^ custName;

protected:
   ArrayList^ custOrders;

public:
   Customer( String^ customername )
   {
      custName = "";
      custOrders = gcnew ArrayList;
      this->custName = customername;
   }


   property String^ CustomerName 
   {
      String^ get()
      {
         return this->custName;
      }

      void set( String^ value )
      {
         this->custName = value;
      }

   }

   property ArrayList^ CustomerOrders 
   {
      ArrayList^ get()
      {
         return this->custOrders;
      }

   }

};


// End Customer class
// The basic customer Order class.
ref class Order: public System::Object
{
private:
   String^ ordID;

public:
   Order( String^ orderid )
   {
      ordID = "";
      this->ordID = orderid;
   }


   property String^ OrderID 
   {
      String^ get()
      {
         return this->ordID;
      }

      void set( String^ value )
      {
         this->ordID = value;
      }

   }

};
// End Order class



void FillMyTreeView()
{
   // Add customers to the ArrayList of Customer objects.
   for ( int x = 0; x < 1000; x++ )
   {
      customerArray->Add( gcnew Customer( "Customer " + x ) );
   }
   
   // Add orders to each Customer object in the ArrayList.
   IEnumerator^ myEnum = customerArray->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      Customer^ customer1 = safe_cast<Customer^>(myEnum->Current);
      for ( int y = 0; y < 15; y++ )
      {
         customer1->CustomerOrders->Add( gcnew Order( "Order " + y ) );
      }
   }

   // Display a wait cursor while the TreeNodes are being created.
   ::Cursor::Current = gcnew System::Windows::Forms::Cursor( "MyWait.cur" );
   
   // Suppress repainting the TreeView until all the objects have been created.
   treeView1->BeginUpdate();
   
   // Clear the TreeView each time the method is called.
   treeView1->Nodes->Clear();
   
   // Add a root TreeNode for each Customer object in the ArrayList.
   myEnum = customerArray->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      Customer^ customer2 = safe_cast<Customer^>(myEnum->Current);
      treeView1->Nodes->Add( gcnew TreeNode( customer2->CustomerName ) );
      
      // Add a child treenode for each Order object in the current Customer object.
      IEnumerator^ myEnum = customer2->CustomerOrders->GetEnumerator();
      while ( myEnum->MoveNext() )
      {
         Order^ order1 = safe_cast<Order^>(myEnum->Current);
         treeView1->Nodes[ customerArray->IndexOf( customer2 ) ]->Nodes->Add( gcnew TreeNode( customer2->CustomerName + "." + order1->OrderID ) );
      }
   }
   
   // Reset the cursor to the default for all controls.
   ::Cursor::Current = Cursors::Default;
   
   // Begin repainting the TreeView.
   treeView1->EndUpdate();
}

// The basic Customer class.
public class Customer : System.Object
{
   private string custName = "";
   protected ArrayList custOrders = new ArrayList();

   public Customer(string customername)
   {
      this.custName = customername;
   }

   public string CustomerName
   {      
      get{return this.custName;}
      set{this.custName = value;}
   }

   public ArrayList CustomerOrders 
   {
      get{return this.custOrders;}
   }
} // End Customer class 

// The basic customer Order class.
public class Order : System.Object
{
   private string ordID = "";

   public Order(string orderid)
   {
      this.ordID = orderid;
   }

   public string OrderID
   {      
      get{return this.ordID;}
      set{this.ordID = value;}
   }
} // End Order class

// Create a new ArrayList to hold the Customer objects.
private ArrayList customerArray = new ArrayList(); 

private void FillMyTreeView()
{
   // Add customers to the ArrayList of Customer objects.
   for(int x=0; x<1000; x++)
   {
      customerArray.Add(new Customer("Customer" + x.ToString()));
   }

   // Add orders to each Customer object in the ArrayList.
   foreach(Customer customer1 in customerArray)
   {
      for(int y=0; y<15; y++)
      {
         customer1.CustomerOrders.Add(new Order("Order" + y.ToString()));    
      }
   }

   // Display a wait cursor while the TreeNodes are being created.
   Cursor.Current = new Cursor("MyWait.cur");
        
   // Suppress repainting the TreeView until all the objects have been created.
   treeView1.BeginUpdate();

   // Clear the TreeView each time the method is called.
   treeView1.Nodes.Clear();

   // Add a root TreeNode for each Customer object in the ArrayList.
   foreach(Customer customer2 in customerArray)
   {
      treeView1.Nodes.Add(new TreeNode(customer2.CustomerName));
          
      // Add a child treenode for each Order object in the current Customer object.
      foreach(Order order1 in customer2.CustomerOrders)
      {
         treeView1.Nodes[customerArray.IndexOf(customer2)].Nodes.Add(
           new TreeNode(customer2.CustomerName + "." + order1.OrderID));
      }
   }

   // Reset the cursor to the default for all controls.
   Cursor.Current = Cursors.Default;

   // Begin repainting the TreeView.
   treeView1.EndUpdate();
}

Public Class Customer
   Inherits [Object]
   Private custName As String = ""
   Friend custOrders As New ArrayList()

   Public Sub New(ByVal customername As String)
      Me.custName = customername
   End Sub

   Public Property CustomerName() As String
      Get
         Return Me.custName
      End Get
      Set(ByVal Value As String)
         Me.custName = Value
      End Set
   End Property

   Public ReadOnly Property CustomerOrders() As ArrayList
      Get
         Return Me.custOrders
      End Get
   End Property
End Class


Public Class Order
   Inherits [Object]
   Private ordID As String

   Public Sub New(ByVal orderid As String)
      Me.ordID = orderid
   End Sub

   Public Property OrderID() As String
      Get
         Return Me.ordID
      End Get
      Set(ByVal Value As String)
         Me.ordID = Value
      End Set
   End Property
End Class

' Create a new ArrayList to hold the Customer objects.
Private customerArray As New ArrayList()

Private Sub FillMyTreeView()
   ' Add customers to the ArrayList of Customer objects.
   Dim x As Integer
   For x = 0 To 999
      customerArray.Add(New Customer("Customer" + x.ToString()))
   Next x

   ' Add orders to each Customer object in the ArrayList.
   Dim customer1 As Customer
   For Each customer1 In customerArray
      Dim y As Integer
      For y = 0 To 14
         customer1.CustomerOrders.Add(New Order("Order" + y.ToString()))
      Next y
   Next customer1

   ' Display a wait cursor while the TreeNodes are being created.
   Cursor.Current = New Cursor("MyWait.cur")

   ' Suppress repainting the TreeView until all the objects have been created.
   treeView1.BeginUpdate()

   ' Clear the TreeView each time the method is called.
   treeView1.Nodes.Clear()

   ' Add a root TreeNode for each Customer object in the ArrayList.
   Dim customer2 As Customer
   For Each customer2 In customerArray
      treeView1.Nodes.Add(New TreeNode(customer2.CustomerName))

      ' Add a child TreeNode for each Order object in the current Customer object.
      Dim order1 As Order
      For Each order1 In customer2.CustomerOrders
         treeView1.Nodes(customerArray.IndexOf(customer2)).Nodes.Add( _
    New TreeNode(customer2.CustomerName + "." + order1.OrderID))
      Next order1
   Next customer2

   ' Reset the cursor to the default for all controls.
   Cursor.Current = System.Windows.Forms.Cursors.Default

   ' Begin repainting the TreeView.
   treeView1.EndUpdate()
End Sub

Kommentarer

Parametern fileName måste referera till en standardmarkörfil (.cur).

Källa:

Cursor.cs

Källa:

Cursor.cs

Källa:

Cursor.cs

Källa:

Cursor.cs

Källa:

Cursor.cs

public:
 Cursor(Type ^ type, System::String ^ resource);

public Cursor(Type type, string resource);

new System.Windows.Forms.Cursor : Type * string -> System.Windows.Forms.Cursor

Public Sub New (type As Type, resource As String)

Parametrar

Exempel

I följande kodexempel visas ett formulär som visar hur du använder en anpassad markör med hjälp Cursor av konstruktorn. Den anpassade Cursor filen är inbäddad i programmets resursfil. Exemplet kräver att du har en markör som finns i en markörfil med namnet MyCursor.cur. Om du vill kompilera det här exemplet med hjälp av kommandoraden inkluderar du följande flagga: /res:MyCursor.Cur, CustomCursor.MyCursor.Cur

using System;
using System.Drawing;
using System.Windows.Forms;

namespace CustomCursor
{
    public class Form1 : System.Windows.Forms.Form
    {
        [STAThread]
        static void Main() 
        {
            Application.Run(new Form1());
        }

        public Form1()
        {
            this.ClientSize = new System.Drawing.Size(292, 266);
            this.Text = "Cursor Example";
            
            // The following generates a cursor from an embedded resource.
            
            // To add a custom cursor, create a bitmap
            //        1. Add a new cursor file to your project: 
            //                Project->Add New Item->General->Cursor File

            // --- To make the custom cursor an embedded resource  ---
            
            // In Visual Studio:
            //        1. Select the cursor file in the Solution Explorer
            //        2. Choose View->Properties.
            //        3. In the properties window switch "Build Action" to "Embedded Resources"

            // On the command line:
            //        Add the following flag:
            //            /res:CursorFileName.cur,Namespace.CursorFileName.cur
            //        
            //        Where "Namespace" is the namespace in which you want to use the cursor
            //        and   "CursorFileName.cur" is the cursor filename.

            // The following line uses the namespace from the passed-in type
            // and looks for CustomCursor.MyCursor.Cur in the assemblies manifest.
        // NOTE: The cursor name is acase sensitive.
            this.Cursor = new Cursor(GetType(), "MyCursor.cur");  
        }
    }
}

Imports System.Drawing
Imports System.Windows.Forms

Namespace CustomCursor
   
   Public Class Form1
      Inherits System.Windows.Forms.Form
      
      <System.STAThread()> _
      Public Shared Sub Main()
         System.Windows.Forms.Application.Run(New Form1())
      End Sub

      Public Sub New()

         Me.ClientSize = New System.Drawing.Size(292, 266)
         Me.Text = "Cursor Example"
         
        ' The following generates a cursor from an embedded resource.
         
        'To add a custom cursor, create a bitmap
        '       1. Add a new cursor file to your project: 
        '               Project->Add New Item->General->Cursor File

        '--- To make the custom cursor an embedded resource  ---

        'In Visual Studio:
        '       1. Select the cursor file in the Solution Explorer
        '       2. Choose View->Properties.
        '       3. In the properties window switch "Build Action" to "Embedded Resources"

        'On the command line:
        '       Add the following flag:
        '           /res:CursorFileName.cur,Namespace.CursorFileName.cur

        '       Where "Namespace" is the namespace in which you want to use the cursor
        '       and   "CursorFileName.cur" is the cursor filename.

        'The following line uses the namespace from the passed-in type
        'and looks for CustomCursor.MyCursor.cur in the assemblies manifest.
        'NOTE: The cursor name is acase sensitive.
        Me.Cursor = New Cursor(Me.GetType(), "MyCursor.cur")
      End Sub
   End Class
End Namespace 'CustomCursor

Kommentarer

Följande är ett exempel på hur du bäddar in en markör som en resurs i ditt program. Om du vill bädda in resursen refererar du till resursnamnet följt av ett kommatecken och sedan dess fullständiga sammansättningssökväg. Se avsnittet Exempel för att lära dig hur du läser in markören från den inbäddade resursen.

Using the C# compiler:
csc /resource:"MyWaitCursor.cur","MyCursors.MyWaitCursor.cur" MyCursor.cs
Using the Visual Basic compiler:
vbc /resource:"MyWaitCursor.cur","MyCursors.MyWaitCursor.cur" MyCursor.vb